Final Program  

The AHFE 2019 Final Program (technical sessions and rooms). Technical Sessions will be held on Friday, July 26, Saturday, July 27, and Sunday, July 28, 2019. Registered participants are encouraged to attend all three days.

Opening Session and Keynote Address: 17:00-19:00 Thursday, July 25, 2019,  Columbia Ballroom (Terrace Level)

Conference Reception and Banquet: 19:00 Thursday, July 25, 2019, Columbia Ballroom (Terrace Level)

If you have any question about your presentation or poster then please contact Conference Administration with a detailed message at ahfeadmin@ahfe.org


For inclusion in the conference proceedings, publication and poster sessions in the final program, 
a unique registration of at least one author or co-author per submission is required by: 25 June 2019
   DETAILED FINAL TECHNICAL PROGRAM:
 

 Friday, July 26

  Saturday, July 27

  Sunday, July 28

 
    8:00 - 18:00
  Detailed Technical Program
  8:00 - 18:00
  Detailed Technical Program
  8:00 - 18:00
  Detailed Technical Program
 
    10:00 – 16:00
  Poster Sessions
  10:00 – 16:00
  Poster Sessions
  10:00 – 12:30
  Poster Sessions
 
 
  Detailed Technical Program  
SESSION Saturday, July 27   •   8:00 - 10:00
TRACK
ROOM
77
Safety and Hazards
Session 77
Saturday, July 27
8:00 - 10:00
RR
Human Factors in Transportation - Road & Rail
Morgan
  Co-Chairs: Sanna Lohilahti Bladfält and Noor Zainab Habib, Sweden/UK  
  Gear shifter design – lack of dedicated positions and the contribution to cognitive load and inattention
  Sanna Lohilahti Bladfält, Camilla Grane, Peter Bengtsson, Sweden
  Forensic analyses of rumble strips
  Jack Auflick, James Sprague, Joseph Eganhouse, Julius Roberts, USA
 
  Investigation of Dubai tram safety challenges and road user behavior through tram driver’s opinion survey
  Shahid Tanvir, Noor Zainab Habib, Guy H. Walker, UAE/UK
  The effects of music background on hazard perception among young adult drivers
  Warren Brodsky, Avinoam Borowsky, Israel
 
Analysis of driving safety and cellphone use based on social media
  Chao Qian, Yueqing Li, Wenchao Zuo, Yuhong Wang, USA
  A scenario-based investigation of truck platooning acceptance
  Matthias Neubauer, Oliver Schauer, Wolfgang Schildorfer, Austria
 
     
78
Symposium: Digital Human Modelling by Women in Human Factors II
Session 78
Saturday, July 27
8:00 - 10:00
DHMAO
Digital Human Modeling and Applied Optimization
Holmead West
Co-Chairs:  Sofia Scataglini and Silvia Imbesi, Belgium/Italy  
  A co-model for research through co-design
  Daniele Busciantella Ricci, Sofia Scataglini, Italy
 
  Toward a co-logical aid for research through co-design
  Sofia Scataglini, Daniele Busciantella Ricci, Belgium
 
  How to turn yourself into a virtual travel companion in someone else's car: Drawing design approaches from the philosophy of mind
  Laura Boffi, Italy
  Monitoring older people: An overview of devices responding to significant needs of elderly affected by Parkinson’s Disease
  Silvia Imbesi, Giuseppe Mincolelli, Italy
  3D mapping of skin compression tolerance for spacesuit fit prediction
  Yaritza Hernandez, Elizabeth Benson, K. Han Kim, Sarah Jarvis, Linh Vu, Sudhakar Rajulu, USA
     
79
Fashion, Clothing and Design Applications
Session 79
Saturday, July 27
8:00 - 10:00
ED
Ergonomics in Design
Fairchild East
  Co-Chairs: Anna Szopa and Yulin Zhao, USA/China  
  The application of ergonomics of the built environment in architectural project as a benefit for the hearing impaired
  Aline Neves, Marcelo Soares, Renata de Assunção Neves, China 
  Girls bra design for the demand of user
  Yulin Zhao, Dingbang Luh, China
 
  Cut Me Off: An exploratory study about how the user perceives the information of clothes textile labels
  Maria Aurileide Ferreira Alves, Gonçalo Falcão, Portugal
  Assessment of Portuguese firefighters’ needs: Preliminary results of a pilot study
  Sophia Piacenza, Miguel Carvalho, Rachel Boldt, Fernando Ferreira, Linsey Griffin, Susan Ashdown, Portugal/USA
     
80
Product and System Design
Session 80
Saturday, July 27
8:00 - 10:00
ED
Ergonomics in Design
Du Pont
  Co-Chairs:  Huimin Hu and Hong Luo, China  
  A JACK-based ergonomic analysis and design of the cockpit of agricultural material-handling vehicles
  Sen Gu, Cheng Huang, Zhiqiang Song, Shasha Yuan, China
  Study on the influence of BMI difference on pressure distribution of mattress
  Huimin Hu, Pu Hong, Mengjing Cai, Yinxia Li, Hong Luo, Haimei Wu, China
 
  Research on body pressure distribution of mattress for different genders
  Huimin Hu, Mengjing Cai, Pu Hong, Yinxia Li, Ling Luo, Haimei Wu, China
 
  Research on comfort of mattresses with different hardness based on body pressure distribution
  Huimin Hu, Pu Hong, Mengjing Cai, Hong Luo, Haimei Wu, China
  Toothbrush innovation design based on man-machine engineering research
  Peng Han, China
 
  Effect of body weight of wheelchair care recipient on physical activity intensity of assistant person
  Haruka Sugiyama, Yohsuke Yoshioka, Masaki Takahashi, Mitsuaki Shiraishi, Fumitake Hakozaki, Satoshi Kameno,
  Yoshihide Tokuda, Ken Nunota, Cheng Jiayu, Japan
  The importance of ergonomics in the development of sustainable materials applied to footwear design
  Ana Fernandes, Portugal
     
81
Ergonomics in Manufacturing
Session 81
Saturday, July 27
8:00 - 10:00
MFG
The Human Aspects of Advanced Manufacturing: Managing Enterprise of the Future
Columbia 1
  Co-Chairs:  Cristina Mora and Edmund Pawlowski, Italy/Poland  
  Impact of industry 4.0 on occupational health and safety
  Aleksandra Polak-Sopinska, Anna Maczewska, Anna Walaszczyk, Zbigniew Wisniewski, Poland
  Ergonomics principles for the design of an assembly workstation for left-handed and right-handed users
  Lucia Botti, Alice Caporale, Maddalena Coccagna, Cristina Mora, Italy
  Lean production management model for SMEs waste reduction in the processed food sector in Peru
  Carlos Raymundo, Ernesto Altamirano, Jose Chavez, Fernando Osorio, Francisco Dominguez, Peru 
  Development of an intelligent robotic additive manufacturing cell for the nuclear industry
  Richard French, Hector Marin-Reyes, Gabriel Kapellmann Zafra, Samantha Abrego, UK
 
  Manageable and scalable manufacturing IT through an app based approach
  Christian Knecht, Andreas Schuller, Andrei Miclaus, Germany
 
  Qualitative features of the human capital in the formation of the agility of enterprises. Research results in Polish companies
  Hanna Wlodarkiewicz-Klimek, Poland
  Human factors/ergonomics in eWorld: Methodology, techniques and applications
  Oleksandr Burov, Ukraine
 
     
82
Human Factors in Transportation: Rail
Session 82
Saturday, July 27
8:00 - 10:00
RR
Human Factors in Transportation - Road & Rail
Columbia 2
  Co-Chairs: Tobias Heine and Denis Miglianico, Germany/France  
  Engineering the right change culture in a complex (GB) rail industry
  Michelle Nolan-McSweeney, Brendan Ryan, Sue Cobb, UK
 
  Analysis of driving performance data to evaluate brake manipulation by railway drivers
  Daisuke Suzuki, Naoki Mizukami, Nobuyuki Tsuyuki, Yutaka Kakizaki, Japan
 
  Decrease driver’s workload and increase vigilance in light rail vehicle
  Denis Miglianico, Vincent Pargade, France
 
  Application of cognitive work analysis to explore passenger behaviour change through provision of information to help relieve train overcrowding
  Jisun Kim, Kirsten Revell, John Preston, UK
  The effect of tram driver's cab design on posture and physical strain
  Tobias Heine, Marco Käppler, Barbara Deml, Germany
 
     
83
Driver Training, Education and Hazards
Session 83
Saturday, July 27
8:00 - 10:00
RR
Human Factors in Transportation - Road & Rail
Columbia 3
  Co-Chairs: Mohammed Al Eisaei and Minerva Rajendran, UAE/India  
  Proposal for graduated driver licensing program: Age vs. experience Abu Dhabi case study
  Yousif Al Thabahi, Marzouq Al Zaabi, Mohammed Al Eisaei, Abdulla Al Ghafli, UAE
 
  Impact of mind wandering on driving
  Minerva Rajendran, Venkatesh Balasubramanian, India
 
  Assessing the relation between emotional intelligence and driving behavior: An online survey
  Swathy Parameswaran, Venkatesh Balasubramanian, India
 
  Road surface roughness and urban bus ride quality in Edinburgh:  "An EEG approach"
  Benjamin Oladele  Afuye, Wafaa Saleh, Achille Fonzone, UK
 
  The analysis of UK road traffic accident data and its use in the development of a direct vision standard for trucks in London
  Russell Marshall, Stephen Summerskill, James Lenard, UK
  The development of a direct vision standard for trucks in London using a volumetric approach
  Stephen Summerskill, Russell Marshall, Abby Paterson, Anthony Eland, UK
 
     
84
Ergonomics and Material Environment Design II
Session 84
Saturday, July 27
8:00 - 10:00
SUPI
Human Factors, Sustainable Urban Planning and Infrastructure
Columbia 4
  Co-Chairs: Wojciech Bonenberg and Agata Bonenberg, Poland  
Human scale in architecture of buildings for the performing arts
  Pawel Amalowicz, Poland
  Serrated and finned glazed facades’ impact on the user’s visual comfort
  Marcin Brzezicki, Poland
 
  Renovations of public spaces at the junction with water – boulevards. Case studies in a spatial, visual and usable context
  Andrzej Sobolewski, Roman Czajka, Poland
  Village regeneration through cultural creativity and local identity: Polish case study
  Wojciech Bonenberg, Agata Bonenberg, Mo Zhou, Poland
 
  Preference of Chinese vernacular windows: Combined effects of shape and view
  Man Zhang, Jiangtao Du, Yuyang Tang, China
 
  Ergonomic shaping of functional and spatial program of housing
  Przemyslaw Nowakowski, Poland
 
     
85
User Experience and HMI: Automation and Transportation
Session 85
Saturday, July 27
8:00 - 10:00
UUE
Usability and User Experience
Columbia 9
   Co-Chairs:  Samineh Gillmore and Timo Schempp, USA/Germany  
  Comparative analysis of controlling drone
  Hajun Kim, Lim Seungchan, Lee Wonsup, South Korea
 
  User centered design strategies for improving visualization of sensor data in rotorcraft cockpit displays for degraded visual environment operations
  Bradley Davis, Kelly Dickerson, Samineh Gillmore, USA
  An evaluation method for a new adaptive operating system - using the example of a tractor
  Timo Schempp, Andreas Kaufmann, Ingmar Stoehr, Markus Schmid, Stefan Boettinger, Germany
  The development of an adaptive HMI - from the idea to the prototype
  Andreas Kaufmann, Timo Schempp, Ingmar Stoehr, Markus Schmid, Thomas Maier, Germany
  A smart factory in a laboratory size for developing and testing innovative human-machine interaction concepts
  Carsten Wittenberg, Benedict Bauer, Nicolaj Stache, Germany
  Comparative research about the preferences in 5 countries for the artificial intelligence agent UX in the multi-display based vehicle
  Hoonsik Yoo, Youngjin Kim, Bong Gyou Lee, South Korea
     
86
Usability and User-Centered Design I
Session 86
Saturday, July 27
8:00 - 10:00
UUE
Usability and User Experience
Columbia 10
  Co-Chairs:   Pamela Savage-Knepshield and Marija Bertovic, USA/Germany  
  Applying user-centered design to software modernization
  Pamela Savage-Knepshield, USA
 
  Human-computer interaction in business process external tasks
  Robert Waszkowski, Tadeusz Nowicki, Małgorzata Oleś, Poland
 
  Usability of the written procedures: an eye tracking study
  Marija Bertovic, Ulf Ronneteg, Germany
 
  Evaluation of online consulting using co-browsing: What factors are related to good user experience?
  Kamalatharsi Mutuura, Andreas Papageorgiou, Oliver Christ, Switzerland
  Proposal of a multidimensional model of user experience in physical settings
  Begoña Julia Nehme, Eugenio Rodríguez, Chile
 
  Usability test: How elders confront food packaging?
  Begoña Julia Nehme, Erik Ciravegna, Chile
 
     
87
Security and Crises Management
Session 87
Saturday, July 27
8:00 - 10:00
SYSI
Human Factors and Systems Interaction
Columbia 11
  Co-Chairs: Mário Simões-Marques and Aysen Taylor, Portugal/USA  
 

Improving usability with think aloud and focus group methods. A case study: An intelligent police patrolling system (I-Pat)
  Tania Calle-Jimenez, Doris Tutillo-Sanchez, Sandra Sanchez-Gordon, Janio Jadán-Guerrero, Cesar Guevara,
  Patricio Lara-Alvarez , Patricia Acosta-Vargas, Luis Salvador-Ullauri, Isabel L. Nunes, Ecuador/Portugal

  Pilots’ role in the critical infrastructure of aviation
  Aysen Taylor, T. Steven Cotter, USA
 
  Influence of dynamic automation function allocations on operator situation awareness and workload in unmanned aerial vehicle control
  Yulin Deng, James Shirley, Wenjuan Zhang, Na Young Kim, David Kaber, USA
  Applying a variation of Delphi method for knowledge elicitation in the context of an intelligent system design
  Mario Simões-Marques, M. Filomena Teodoro, Gabriel Calhamonas, Isabel l. Nunes, Portugal
  Disaster management support system prototype design evolution based on UX testing
   Mário Simões-Marques, Pedro Mendonça, Diogo Figueiredo, Isabel L. Nunes, Portugal
 
  A study of an airworthiness requirement influence of human factors on aviation incidents
  Zhang Yinbo, Jin ZheFeng, Ruijie Fan, Meng Hua, Shasha Lu, China
 
     
88
Panel: Advances in Navy Training Research and Applications
Session 88
Saturday, July 27
8:00 - 10:00
TELS
Human Factors in Training, Education, and Learning Sciences
Columbia 12
  Chair:   Beth Atkinson, USA  
  Advances in Navy training research and applications
  Henry Phillips, USA
 
  When human performance assessment data becomes big: Adhering to psychometric principles in the era of “big data”
  Mitchell Tindall, Beth Atkinson, USA
  Advances in Navy training research and applications: Using synthetic crew members for CRM training
  John Killilea, USA
  Advances in Navy training research and applications: The development of manned-unmanned teaming training
  John Killilea, Emily Anania, USA
  Scenario based adaptive training tools to support shipboard tactical decision making
  James Pharmer, USA
 
     
89
Advanced Methods for Human-Agent Interfaces
Session 89
Saturday, July 27
8:00 - 10:00
HFRUS
Human Factors in Robots and Unmanned Systems
Cardozo
  Co-Chairs:  Jessica Reichers and Nia Peters, USA  
  Virtual ship information overlay and navigation "VISION" system
  Katia Estabridis, Jessica Reichers, Nathan Brannon, Joshua Rubini, Gary Hewer, Naomi Hillis, USA
  Task engagement inference within distributed multiparty human-machine teaming via topic modeling
  Nia Peters, USA
  Decision making using automated estimates in the classification of novel stimuli
  Amber Hoenig, Joseph Stephens, USA
 
  Participant perception and HMI preferences during simulated AV disengagements
  Syeda Sheherbano Rizvi, Francesca Favaro, Sumaid Mahmood, USA
 
     
90
Human Factors in Virtual Environments II
Session 90
Saturday, July 27
8:00 - 10:00
HFGD
Human Factors in Virtual Environments and Game Design
Gunston West
  Co-Chairs:  Brian Sanders and Stijn Verwulgen, USA/Belgium  
  Understanding user interface preferences for XR environments when exploring physics and engineering principles
  Brian Sanders, Yuzhong Shen, Dennis Vincenz, USA
  Appreciation of proportion in architecture: A comparison between facades primed in virtual reality and on paper
  Stijn Verwulgen, Sander Van Goethem, Gustaaf Cornelis, Jouke Verlinden, Tom Coppens, Belgium
  Immersive virtual reality beyond available physical space
  Nicholas Caporusso, Gordon Carlson, USA
 
  Gazing pattern while using AR route-navigation on smartphone
  Asami Tanabe, Yohsuke Yoshioka, Japan
 
  Healthcare design based on virtual reality technology: Enhance the user's engagement in the rehabilitation process
  Yu Qiao, Siyi Yang, China
  Research on virtual simulation evaluation system for passenger compartments lighting of subway trains in China
  Jian Xu, Ze-rui Xiang, Jin-yi Zhi, Xiao-fei Xu, Si-jun He, Jin Wang, Yang Du, Gang Xu, China
     
91
Human Factors in Aging and Gerontology I
Session 91
Saturday, July 27
8:00 - 10:00
AGE
Human Factors in Aging and Gerontology 
Embassy
  Co-Chairs: Jay Kalra and Mengyi Cao, Canada/China  
  Alterations in thyroid function testing with aging
  Jay Kalra, Zoher Rafid-Hamed, Patrick Seitzinger, Canada
 
  A grip force training and testing device for old people
  Shijian Luo, Ze Bian, Yufei Zhang, Ping Shan, Hebo Gong, China
 
  Optimized design of accompanying smart car for the elderly based on humanization design methods
  Mengyi Cao, Xingyi Zhong, Ting Han, China
  Measuring ways research on public facilities of the elderly’s physical flexibility
Xing-Rong Wen, Ding-Bang Luh, China
 
  Individual 3D behavior capture method for elderly people with dementia under everyday life environment with RGBD camera
  Kei Hirano, Yoshifumi Nishida, Yusuke Miyazaki, Koji Kitamura, Japan
     
92
Smart Additive Manufacturing: Sensing, Data Analytics and Process Control
Session 92
Saturday, July 27
8:00 - 10:00
AMMSP
Additive Manufacturing, Modeling Systems and 3D Prototyping
Gunston East
  Co-Chairs:  Prahalad Rao and Hongyue Sun, USA  
  Modeling in-plane deviations of shapes to come based on prior deviation features in additive manufacturing
  Arman Sabbaghi, USA
  Ushering the digital twin in metal additive manufacturing – a case for model-based monitoring of porosity in directed energy deposition.
  Prahalada Rao, USA
  Cyber-coordinated simulation models for multi-stage additive manufacturing of energy products
  Hongyue Sun, USA
 
  3D printing of high-strength continuous carbon fiber reinforced polymer composites
  Pedram Parandoush, Dong Lin, USA
 
  Toward defect-free additive fabricating of flexible and hybrid electronics: Physics-based computational modeling and control of aerosol jet printing
  Roozbeh (Ross) Salary, Jack Lombardi, Darshana Weerawarne, Prahalada Rao, Mark Poliks, USA
     
93
Cross-Cultural Decision Making I
Session 93
Saturday, July 27
8:00 - 10:00
CCDM
Cross-Cultural Decision Making
Jay
  Co-Chairs:  Atsuo Murata and Toshihisa Doi, Japan  
  Employee satisfaction, task performance, and emotional labor: An empirical examination
  Noriko Okabe, Japan
 
  Sensitivity analysis of intercultural relationship based on DMIS model
  Zhenbin Wu, Baocui Chen, Xuebo Chen, China
 
  Cross-cultural analysis of top page design among Brazilian, Chinese, Japanese and United States web sites
  Toshihisa Doi, Atsuo Murata, Japan
  Globalisation, cultural differentiation and pluralism processes and proactive dimension of human world of “boundary-less careers”
  Agnieszka Cybal-Michalska, Poland
  Influential factors in cross-country standards adoption from a macroergonomics perspective
  Qinyi Liu, Liang Ma, Phairoj Liukitithara, China
 
     
94
Interdisciplinary Practice for Automobile Design
Session 94
Saturday, July 27
8:00 - 10:00
IPID
Interdisciplinary Practice in Industrial Design
Holmead East
  Co-Chairs:  Canqun He and Chunrong Liu, China  
  Extracting contour shape of passenger car form in rear view based on form similarity judgment by young Chinese consumers
    Chunrong Liu and Minghua Zhang, China
  Research on evaluation of CMF based on vision in automobile seat design
  Canqun He, Xue Sun, Weizhen Xiao, China
 
  Study on the design elements of shape and interface of modern agricultural machinery
  Yitong Liu , Huabin Wang, China
 
  Research on steering wheel interaction design for middle class consumers
  Xiyao Wang, Jiong Fu, China
 
     
  Refreshments 10:00 - 10:30    •    Room: Columbia West  (Terrace Level)
SESSION Saturday, July 27    •   10:30 - 12:30
TRACK
ROOM
96
Toward a Unified Approach for Studying Long-Term Bonding Between Humans and Autonomy
Session 96
Saturday, July 27
10:30 - 12:30
CN
Cognitive & Neuroergonomics
Morgan
  Chair:  Frank Krueger, USA  
  The role of mind perception in bonding between humans and autonomy
  Jonathan Gratch, USA
 
  Monitoring brain function during human robot interaction with mobile fNIRS in natural settings
  Hasan Ayaz, USA
 
  The role of oxytocin in shaping long-term human bonding
  Mary Lee, USA
 
  A neuropsychological model of long-term bonding between humans and autonomy
  Frank Krueger, USA
 
  Long-term bonding with social robots
  Ewart de Visser, USA
 
     
97
Human-Machine Interaction in Systems
Session 97
Saturday, July 27
10:30 - 12:30
ICEEP
Industrial Cognitive Ergonomics and Engineering Psychology
Holmead West
  Co-Chairs:  Umer Asgher and Salman Nazir, Pakistan/Norway  
  Black hole illusion: Functions of temporal and spatial cues
  Ming Chang, Lei Huang, China
 
  Research on interactive performance optimization strategy of complex systems based on information coding
  Tian Qin, Siyi Wang, China
  Novel metaheuristic approach: Integration of variables method (IVM) and human-machine interaction for subjective evaluation
  Umer Asgher, Rolando Simeón Monet, Riaz Ahmad, José Arzola-Ruiz, Pakistan/Cuba
  Modeling and multi-objective optimization of insulating lining using Heuristic technique “Exploration of Variables Codes (ECV)”
  Umer Asgher, José Arzola-Ruiz, Osmel Martínez-Valdés, Riaz Ahmad, Yasar Ayaz, Sara Ali, Pakistan/Cuba
  Using adaptive integration of variables algorithm for analysis and optimization of 2D irregular nesting problem
  José Arzola-Ruiz, Arlys Michel Lastre, Alexis Cordovés-García, Umer Asgher, Cuba/Pakistan
  Predicting operator performances and cognitive efficiency by monitoring physiological and cognitive states to improve risk management
  Eva Hansenne, Jerome Wertz, Mathieu Jaspar, Anne-Sophie Nyssen, Clementine Francois, Belgium
  Evaluation of fatigue and comfort of blue light under general condition and low blue light condition
  Yunhong Zhang, Na Liu, Hong Chen, China
     
98
Safety Management and Behavior Analysis
Session 98
Saturday, July 27
10:30 - 12:30
SMHF
Safety Management and Human Factors
Fairchild East
  Co-Chairs:   Kapo Wong and Alan H.S. Chan, Hong Kong  
  Gender differences in risk-taking-related personality traits and risk perception: implications for safety training and awareness programs
  Kapo Wong, Alan H.S. Chan, Saad A. Alabdulkarim, Hong Kong
  Socially oriented design of technical systems and objects: Safety and accident prevention
  Yulia Salnikova, Evgeny Kolbachev, Russia
 
  Compliance supervision or self-regulation? A new research perspective based on game theory
  Yuan Gao, Yunxiao Fan, China
 
  Issues of human error management in introducing new technology for bridge inspection drones
  Riku Tsunori, Yusaku Okada, Japan
 
  Driving risk assessment under the effect of alcohol through an eye tracking system in virtual reality
  Chiara Ferrante, Valerio Veraldi, Maria Rosaria De Blasiis, Italy
  The impact of autonomous vehicles’ active feedback on trust
  Ana Mackay, Inês Fortes, Catarina Santos, Dário Machado, Patrícia Barbosa, Vera Vilas Boas, João Ferreira, Nelson Costa, Carlos Silva, Emanuel Sousa, Portugal
     
99
The Present and Future of Macroergonomic Systems
Session 99
Saturday, July 27
10:30 - 12:30
SOE
Social & Occupational Ergonomics
Du Pont
  Co-Chairs: Marcin Butlewski and Ana Margarida Ferreira, Poland/Portugal    
  Gamifying onboarding: How to increase both engagement and integration of new employees
  Louisa Heimburger, Rúben Gouveia, Oliver Korn, Lea Buchweitz, Germany
 
  Well-being through design for dynamic diversity: The voice of minorities in design for all
  Marcin Butlewski, Poland
 
  Social design, innovation and ergonomics: Reflections on education, transdisciplinarity, and new blurred models for sustainable social change
  Ana Margarida Ferreira, Nicos Souleles, Stefania Savva, Portugal
  Towards an expert system for assigning optimal workplaces to workers with disabilities
  Gregor Harih, Nataša Vujica-Herzog, Slovenia
 
  The role of building construction project planning in accommodating ergonomic considerations of the aging workforce
  Steven Kangisser, Young Mi Choi, USA
  Ergo + 50: Ergonomic assessment methodology aimed at older workers
  Alberto Ferreras Remesal, Carlos Chirivella Moreno, Alicia Piedrabuena Cuesta, Rakel Poveda Puente, Sonia Serna Arnau,
  Consuelo Latorre Sánchez, Mercedes Sanchís Almenara, Raquel Marzo Rosello, Spain
     
100
Ergonomics in Urban Design I
Session 100
Saturday, July 27
10:30 - 12:30
SUPI
Human Factors, Architecture, Sustainable Urban Planning and Infrastructure
Columbia 1
  Co-Chairs: Joanna Jablonska and Anna Jaglarz, Poland  
  Landscape parks in China:  Steering and handling growing tourism
  Teresa Bardzinska-Bonenberg, Shoufang Liu, Poland
 
  Smart village as a model of sustainable development: Case study of Wielkopolska region in Poland
  Wojciech Bonenberg, Mo Zhou, Xia Wei, Poland
  "The growing house" – The way to solve the housing problem in Interwar Germany
  Jadwiga Urbanik, Poland
 
  Architectural challenges of designing front entrance area at city schools
  Andrzej Dudzinski, Poland
 
  Smart eco-villages and tourism development based on rural revitalization with comparison Chinese and Polish traditional villages experiences
  Ling Qi, Mo Zhou, Wojciech Bonenberg, Zixuan Ma, China
  Management balance between nature and rural settlements in China
  Shoufang Liu, Lin Li, Wojciech Bonenberg, Teresa Bardzinska-Bonenberg, Mo Zhou, China
 
  Active city for healthy ageing and “anti-globesity”
  Cristiana  Cellucci, Michele Di Sivo, Italy
 
     
101
Usability and User-Centered Design II
Session 101
Saturday, July 27
10:30 - 12:30
UUE
Usability and User Experience
Columbia 2
  Co-Chairs:  Hashim Chunpir and Lauren LaSpina-Paoletti, Germany/USA   
  Comparison of information technology service management (ITSM) practices in e-science, libraries, public administration and the private sector
  Hashim Chunpir, Germany
  GDPR considerations in recruiting participants for human factors research
  Richard Horst, Yasmin Diederiks, USA
 
  Heuristic and bias information on ship engine operation alarm display
  Adi Mas Nizar, Takashi Miwa, Makoto Uchida, Masumi Nakamura, Japan
 
  Closing the gap of creating design concepts for DSS by applying the situation awareness oriented design principles
  Elena Dalinger, Daniel Feiser, Germany
  Building a house with a limited tool set: Overcoming the challenge of incorporating usability in the acquisition process
  Jade Driggs, Alice Diggs, Richard Steinberg, USA
  Are you prepared for the ISO 11607 medical device packaging changes?
  Lauren LaSpina-Paoletti, USA
 
     
102
Human Interaction with Small Unmanned Aerial Systems
Session 102
Saturday, July 27
10:30 - 12:30
HFRUS
Human Factors in Robots and Unmanned Systems
Columbia 3
  Co-Chairs:  Durant Bridges and Antti Väätänen, USA/Finland  
  Small unmanned aircraft-systems-operations augmented reality user interface types
  Durant Bridges, USA
 
  Human–drone interaction: Virtues and vices in systemic perspective
  Khavanova Inna, Olga Burukina, Russia
 
  Development of a concept of operations for autonomous systems
  Antti Väätänen, Jari Laarni and Marko Höyhtyä, Finland
 
  Visual detection of trespassing of a small unmanned aerial vehicle into an airspace
  Kai Li, S Chang, Lu Peng, Caijun Zhao, Taiwan
 
  Taking advantage of swarming to support consistent and predictable behavior of an autonomous system following loss of communications
  Serge Chaumette, France
  Spatiotemporal analysis of “Jello Effect” in drone videos
  Yang Cai, Eric Lam, Todd Howlett, Alan Cai, USA
 
     
103
Human Factors in Cybersecurity: Awareness and Cyber-Physical Security
Session 103
Saturday, July 27
10:30 - 12:30
CYBER
Human Factors in Cybersecurity
Columbia 4
  Co-Chairs:  Nicholas Caporusso and Jeremiah Still, USA  
  Perceiving behavior of cyber malware with human-machine teaming
  Yang Cai, Jose Morales, Neta Ezer, USA
 
  Human-centered cyber situation awareness
  Vincent Mancuso, Sarah McGuire, Diane Staheli, USA
 
  Over-the-shoulder attack resistant graphical authentication schemes impact on working memory
  Jeremiah Still, Ashley Cain, USA
  Comparative evaluation of security and convenience trade-offs in password generation aiding systems
  Nicholas Caporusso, Michael Stainbrook, USA
  HackIT: A human-in-the-loop simulation tool for realistic cyber deception experiments
  Palvi Aggarwal, Aksh Gautam, Vaibhav Aggarwal, Cleotilde Gonzalez, Varun Dutt, USA
 
  Mathematical model of intrusion detection based on sequential execution of commands applying Pagerank
  Cesar Guevara, Jairo Hidalgo, Marco Yandún, Hugo Arias, Lorena Zapata-Saavedra, Ivan Ramirez-Morales,
  Fernando Aguilar-Galvez,Lorena Chalco-Torres, Dioselina Pimbosa Ortiz, Ecuador
  Why drive license-free on information highway?
  Aftab Ahmad, Hak J. Kim, USA
 
     
104
Designing for Inclusion in the Cultural Heritage
Session 104
Saturday, July 27
10:30 - 12:30
DI
Design for Inclusion
Columbia 9
  Co-Chairs:  Giuseppe Mincolelli and Alessandra Rinaldi, Italy  
  Media convergence in information transmission in museum space
  Yongbin Wang, Yongbin Wang, China
 
  User interaction and scenario-based experience design for new media technology in museum spatial experience
  Jian Yu, Yongbin Wang, China
  Inclusive design practices for natural parks. Products and services for experience-focused solutions in places of high naturalistic value
  Ivo Caruso, Vincenzo Cristallo, Carlo Martino, Italy
  Inclusive participation design methodologies for digital cultural heritage
  Giuseppe Mincolelli, Michele Marchi, Italy
 
  An application for mobile systems developed with the community involvement. An open source mobile application project of a perceptive city map
  Francesca Bozza, Italy
  The effect of sliding door hardware design on opening operation
  Satoshi Kose, Yoshiaki Goto, Ken Nunota, Shinji Tanaka, Japan
 
     
105
Advances in Computational Social Sciences
Session 105
Saturday, July 27
10:30 - 12:30
HFSIM
Human Factors and Simulation
Columbia 10
  Co-Chairs: Zining Yang and Sekwen Kim, USA  
  Diffusion of environmental protectionism: single-use plastic bags ban policy in California
  Zining Yang, Sekwen Kim, USA
 
  The urban renew case study on a feasibility profit sharing in different development intensity by game theory
  Yuan Yuan Lee, Zining Yang, Oliver Shyr, USA
  Nefarious actors: An agent based analysis of threats to the democratic process
  Nicholas Stowell, Norvell Thomas, USA
 
  Train intelligent detection system based on convolutional neural network
  Zhang Qiang, Zining Yang, Gao Chunhai, Cheung Virginia, USA
 
     
106
Human Factors in Game Design II
Session 106
Saturday, July 27
10:30 - 12:30
HFGD
AHuman Factors in Virtual Environments and Game Design  
Columbia 11
  Co-Chairs:  Kun Chen and Ricardo Navarro, China/Peru  
  Logic evaluation through game-based assessment
  Carlos Arce-Lopera, Alan Perea, Colombia
 
  Designing experiences: A virtual reality video game to enhance immersion
  Ricardo Navarro, Vanessa Vega, Sergio Martinez, Maria José Espinosa, Daniel Hidalgo, Brian Benavente, Peru
  The design of a WebGL-based 3D virtual roaming system for the "Batu Hitam" shipwreck
  Gantian Bian, Baosheng Wang, China
 
  Virtual reality and its effect on intrinsic motivation during simulator training
  Salman Nazir, Steven Mallam, Norway
 
  The design of card game for leukemia children based on narrative design
  Hongzhi Pan, Long Ren, Chenyue Sun, Jiali Zhang, China
 
     
107
Human Factors and Wearable Technologies II
Session 107
Saturday, July 27
10:30 - 12:30
HFWT
Human Factors and Wearable Technologies
Columbia 12
  Co-Chairs:  Chantal Lidynia and Chih-Yu Hsiao, Germany/Taiwan  
  A novel joint angle measurement system to monitor hip movement in children with hip diseases
  Donato Giuseppe Leo, Badr M. Abdullah, Daniel C. Perry, Helen Jones, UK
  Nudging vs. budging: Users’ acceptance of nudging for more physical activity
  Chantal Lidynia, Julia Offermann-van Heek, Martina Ziefle, Germany
 
  Evaluation of suitable rest times for the use of optical head-mounted displays
  Chih-Yu Hsiao, Yi-An Liu, Mao-Jiun Wang, Taiwan
 
  Smartphone-based human fatigue detection for daily activities using gait analysis
  Swapnali  Karvekar, Ehsan Rashedi, Masoud Abdollahi, USA
 
  Wearable smart emotion-aware gloves: Development of a new way for people to interact with others
  Shijian Luo, Ping Shan, Chengyi Shen, Zhitong Cui, Ze Bian, Huan Lin, Wenyin Zou, China
     
108
Human Error Considerations in Design
Session 108
Saturday, July 27
10:30 - 12:30
HERRP
Human Error, Reliability, Resilience, and Performance
Cardozo
  Co-Chairs:  Xiaoli Wu and Salvador Avila Filho, Japan/Brazil  
  Mining human error incident patterns with text classification
  Toru Nakata, Japan
 
  A risk analysis method for human-machine system based on risk scenario and interaction interface analysis
  Xing Pan, Yuhang Jiang, Wenjin Zhang, Xianheng Zhao, China
  Human factors engineering analyses for human system interface of severe accident management support system based on human factors engineering program
  Lee Sungheon, Jonghyun Kim, South Korea
  Research on the evaluation method of human factors for the display and warning system of power plant in aircraft cockpit
  Zongpeng Wang, Yundong Guo, Youchao Sun, China
  Optimization of information interaction interface based on error-cognition mechanism
  Xiaoli Wu, Chengqi Xue, Feng Zhou, Linlin Wang, Weiwei Zhang, Tingting Zhang, Ling Xia, China
  ‘To err is human’ but it’s time to go deeper. An analysis of human and system level challenges in the educational testing industry
  Irenka Suto, Jo Ireland, UK
  A pilot error analysis method for the human-machine interface design process of civil aircraft cockpit
  Shasha Lu, Yang Zhou, Hongtao Liu, Zhefeng Jin, China
     
109
Human Factors for Technologies in Apparel and Textile Design/Engineering
Session 109
Saturday, July 27
10:30 - 12:30
HFATE
Human Factors for Apparel and Textile Engineering
Gunston West
  Co-Chairs:  F. Moreira da Silva and Gianni Montagna, Portugal  
  Distribution of clothing pressure in support knee-high socks and its evaluation
  Tamaki Mitsuno, Aya Yamagishi, Mayuko Takenaka, Japan
 
  Reliability of anthropometric reference data for children’s product design
  Su-Jeong Shin, Mona Maher, USA
 
  Formation of the 3D virtual models for clothing fit assessment applied in human factors
  Hyunjung Lee, Su-Jeong Shin, USA
 
  Research on the characteristics of hand shape in different countries
  Jing Zhao, Gang Wu, Chao Zhao, Fan Zhang, Haitao Wang, Xinyu Cao, China
 
  Clothing pressure alters brain wave activity in the occipital and parietal lobes
  Yunjuan Liu, Yan wang, Dongsheng Chen, Yingjin Gan, China
 
  Development of flame retardant Fiber Reinforced Plastics products embedded with Japan-specific traditional design
  Tetsuo Kikuchi, Japan
     
110
Macro 3D Printing
Session 110
Saturday, July 27
10:30 - 12:30
AMMSP
AMMSP
Embassy
  Co-Chairs:  Hemang Kumar Jayant and Jonathon Piasente, India/USA  
  Evaluation of early-age concrete structural build-up for 3D concrete printing by oscillatory rheometry
  Wilson Ricardo Leal da Silva, Herve Fryda, Thomas Juul Andersen, Per Norelius, Jean-Noel Bousseau, Denmark
  Induction heating based 3D metal printing of eutectic alloy using vibrating nozzle
  Hemang Kumar Jayant, Manish Arora, India
   
  Additive manufacturing of Portland cement based cementitious materials
  Jonathon Piasente, Aleksandra Radlinska, Maryam Hojati, USA
   
  Scaling from paste to mortar for 3D printing
  Scott Jones, Nicos Martys, USA
 
  Safety and performance of reinforced concrete additive construction
  Eric Kreiger, Brandy Diggs-McGee, Tanner Wood, Bruce MacAllister, Megan Kreiger, USA
 
     
111
Production, Quality and Intelligent Control Systems
Session 111
Saturday, July 27
10:30 - 12:30
APMPC
Advanced Production Management and Process Control
Gunston East
  Co-Chairs: Beata Mrugalska, Carlos Raymundo and Fiorella Lastra, Poland/Peru  
  Production management model based on lean manufacturing for cost reduction in the timber sector in Peru
  Fiorella Lastra, Nicolas Meneses, Ernesto Altamirano, Carlos Raymundo, Javier M. Moguerza, Peru
  Production management model for increasing productivity in bakery SMEs in Peru
  Junior Huallpa, Tomas Vera, Ernesto Altamirano, Carlos Raymundo, Javier M. Moguerza, Peru
  Conditioning of computerized maintenance management systems implementation
  Zbigniew Wisniewski, Artur Blaszczyk, Poland
   
  Analysis of operational efficiency in picking activity on a pipes and fittings company
  Gustavo Moresco, Vanina Silva, Brazil
   
  Remaining useful life prediction for components of automated guided vehicles
  Beata Mrugalska, Ralf Stetter, Poland
   
  Discussion on the range of cut-off values in robust algorithm A
  Zhang Fan, Yue Zhang, Zhao Chao, Jing Zhao, Gang Wu, Haitao Wang, Xinyu Cao, China
   
  Model for dilution control applying empirical methods in narrow vein mine deposits in Peru
  Luis Salgado, Diego Nuñez, Ivan Pehovaz, Carlos Raymundo, Javier M. Moguerza, Peru
   
     
112
Design Embracing Information Science, Intention and Experience
Session 112
Saturday, July 27
10:30 - 12:30
IPID
Interdisciplinary Practice in Industrial Design
Jay
  Co-Chairs:  Cliff Shin and Stan Ruecker, USA  
  Planting new seeds: Opportunities for design to transform agriculture through emerging technologies
  John Capozzo, Cliff Shin, USA
  Should the environment be a human factor?
  Stan Ruecker, Claudia Grisales,  John A. Capozzo,  Juan Alfonso de la Rosa, Gerry Derksen, Priscilla Boff Ferronato,
  Thais Cristina Sehn, Cliff Shin, USA
  Quantitative research on the relationship between design elements and Kansei image of electric vehicle styling
  Mingzhu Li, Canqun He, Zhangping Lu, Liqing Huang, China
  Research on modeling design of modern agricultural machinery based on soft system methodology
  Huabin Wang, Baoping Xu, China
 
     
113
Human Factors in Training, Education, and Learning Sciences
Session 113
Saturday, July 27
10:30 - 12:30
TELS
Human Factors in Training, Education, and Learning Sciences
Holmead East
  Co-Chairs:  Ellen Bass and Benita Zulch, USA/South Africa  
  Challenges in operator training for (semi-)autonomous systems
  Salman Nazir, Norway
 
  The construction manager’s mask: A more purpose-fit selection for South Africa
  Andries van Heerden, Michelle Burger, Benita Zulch, South Africa
 
Developing an online community of learners for maritime training – a case study
  Amit Sharma, Salman Nazir, Norway
Curriculum infusion through case studies: Engaging undergraduate students in course subject material and influencing behavior change
  Ellen Bass, Holly Foster, Douglas Lee, Susie Bruce, R. Reid Bailey, USA
  UI preferences for programming education
  Blessing Leonard, Giovanni Vincenti, USA
 
  Directions towards sustainability through higher education
  Theresa Lobo, USA
 
     
  Lunch Break 12:30 - 13:30   •    Enjoy lunch at the restaurant of your choice
SESSION Saturday, July 27    •   13:30-15:30
TRACK
ROOM
115
Sensory Engineering and Emotion
Session 115
Saturday, July 27
13:30-15:30
APD
Affective and Pleasurable Design 
Morgan
  Co-Chairs:  Keiichi Watanuki and Keiichi Muramatsu, Japan  
Evaluation of psychological emotions during fragrance exposure by chaotic analysis of fingertip plethysmography
  Tomofumi Sakata, Keiichi Muramatsu, Kazunori Kaede, Keiichi Watanuki, Japan
Evaluation of emotions induced by 2D and 3D video systems in a two-dimensional emotion space
  Akifumi Harada, Keiichi Watanuki, Keiichi Muramatsu, Kazunori Kaede, Japan
Motion characteristics of elderly in handlebar operation of mobility scooter
  Kazunori Kaede, Masato Utsugi, Keiichi Muramatsu, Keiichi Watanuki, Japan
Evaluation of difference in face color preference between humans and human-like agents
  Keiichi Muramatsu, Yoshimasa Tawatsuji, Kazunori Kaede, Eiichiro Tanaka, Tatsunori Matsui, Keiichi Watanuki, Japan
The effects of neuromodulation on creative thinking
  Koji Koizumi, Kazutaka Ueda, Ziyang Li, Naoki Tateyama, Masayuki Nakao, Japan
Improvement of health behavior based on health information feedback
  Tetsuro Ogi, Kenichiro Ito, Kotaro Ohashi, Japan
Neural bases of creative thinking
  Kazutaka Ueda, Masayuki Nakao, Japan
 
116
Health and Neuroergonomics
Session 116
Saturday, July 27
13:30-15:30
CN
Holmead West
  Co-Chairs:  Peter Hall and Hasan Ayaz, Canada/USA  
  Novel contributions of neuroergonomics and cognitive engineering to population health
  Peter Hall, Canada
   
Beyond physical domain, understanding workers cognitive and emotional status to enhance worker performance and wellbeing
  Juan Manuel Belda-Lois, Carlos Planell Palop, Andrés Soler, Nicolás Palomares Olivares, Purificación Castelló Mercé,
  Consuelo Latorre Sánchez, Jose Laparra Hernández, Spain
Machine-learning classifier for discerning performance levels of physicians evaluating MRI brain scans for early-stage Alzheimer's disease
  Javed Mostafa, Yi Hong, Wang Yue, Daniel Kaufer, Prithima Mosaly, Lukasz Mazur, USA
Application of functional near infrared spectroscopy (fNIRS) on speech and language research in children
  Selen Gündüz, Turkey
A cross-sectional study using wireless electrocardiogram to investigate physical workload of wheelchair control in real world environments
  Shawn Joshi, Roxana Ramirez Herrera, Daniella Nicole Springett, Benjamin David Weedon,
  Dafne Zuleima Morgado Ramirez, Catherine Holloway, Hasan Ayaz, Helen Dawes, USA
Performance and brain activity during a spatial working memory task: Application to pilot candidate selection
  Mickael Causse, Zarrin Chua, Nadine Matton, France
Hierarchical models of smartphone-derived signals to predict context
  Matthew Pava, Matthew Widjaja, Sophia Mayne-DeLuca, Eric Shieh, Bartlett Russell, USA
 
117
Digital Human Modeling and Applied Optimization II
Session 117
Saturday, July 27
13:30-15:30
DHMAO
Digital Human Modeling and Applied Optimization 
Fairchild East
  Co-Chairs:  Sudhakar Rajulu and Jan Neuhoefer, USA/Germany  
  Predicting anthropometric measurements from 3D body scans: Methods and evaluation
  Peng Li, Steven Paquette, USA
 
  Application of multi-objective optimization on ergonomics in production – A case study
  Aitor Iriondo, Dan Högberg, Anna Syberfeldt, Erik Brolin, Lars Hanson, Sweden
 
Predictive assessments of spacesuit fit using a Monte-Carlo analysis
  K. Han Kim, Linh Vu, Elizabeth Benson, Richard Rhodes, Sudhakar Rajulu, USA
From design sketch to immersive product experience: Exploration of a new competence portfolio
  Jan Neuhoefer, Felix Rockel, Germany
Rigging and re-posing a human model from standing to cycling configuration
  Raman Garimella, Koen Beyers, Toon Huysmans, Stijn Verwulgen, India
 
118
Virtual Reality
Session 118
Saturday, July 27
13:30-15:30
ED
Ergonomics in Design 
Du Pont
  Co-Chairs:  Paulo Noriega and Francisco Rebelo, Portugal  
Evaluation of behavioral compliance with safety warnings at different levels of cognitive load in warehouses
  Ana Almeida, Francisco Rebelo, Paulo Noriega, Portugal
Locomotion-in-place and teleport: Which is the best technique to be used in human behavior research using virtual reality?
  Inês Galrão, Francisco Rebelo, Paulo Noriega, Portugal
Influence of distance from observation point to hanging wall on feeling of depth of space behind wall
  Daiya Nagakura, Yohsuke Yoshioka, Japan
Openness feeling on height direction in high ceiling room and bending pattern of leading passage
  Takuya Sugiyama, Yohsuke Yoshioka, Japan
Exploratory study to investigate the influence of a third person on an individual emergency wayfinding decision.
  Paulo Noriega, Elisângela Vilar, Francisco Rebelo, Inês Galrão, Daniel Semedo, Nuno  Graça, Portugal
Emotion through narrative: Validation for user engagement in game context
  Yanick Trindade, Francisco Rebelo, Paulo Noriega, Portugal
How deep is a virtual reality experience: Virtual environments, emotions and physiological measures
  Paulo Noriega, Tiago Oliveira, José Carvalhais, Francisco Rebelo, Vanessa Cristina Gonçalves Lameira, Portugal
 
119
Communication Design
Session 119
Saturday, July 27
13:30-15:30
ED
Ergonomics in Design 
Columbia 1
  Co-Chairs:  Daniel Raposo and Elsabete Rolo, Portugal  
  Communication design as tool for social transformation: A co-design project with the residents of the Rego Neighborhood, in Lisbon
  Inês Coimbra, Teresa Olazabal Cabral, Portugal
  Boundary dimension design of graphical symbols based on user preference
  Zhongting Wang, Ling Luo, Linghua Ran, Liang Zhang, China
   
  An ergonomic assessment on the detectability design of the New Generation Currency (NGC) coin series and Bangko Sentral ng Pilipinas (BSP) coin series
 Diane Denise Francisco, Patricia Michaela C. Gregorio, Ninna Ysabel G. Layug, Nikole Andrei B. Mallare, Philippines
  The brand mark competitors map as visual research tool. Using graphic and symbolic data in the brand visual identity project
  Daniel Raposo, Rogério Ribeiro, Mariana Martins Amaral, Juan-R. Martin-Sanroman, Portugal
  A methodology for the analysis of brand visual identity of food products: comprehension and valuation of graphic signs
  Daniel Raposo, Catarina Laginha, João Neves, Jose Silva, Fernando Moreira da Silva, Portugal
     
120
Innovative Methods and Approaches for System Interaction Design
Session 120
Saturday, July 27
13:30-15:30
SYSI
Human Factors and Systems Interaction 
Columbia 2
Co-Chairs: Isabel L. Nunes and Maximilian Zarte, Portugal/Germany
Learning from employee perceptions of human-work and work-organization in digitized production-drilling activity in mines
  Mohammed Aminu Sanda, Ghana/Sweden
Vehicle multi-sensory user interaction design research based on the minds methods
  Qianqian Wu, Zhang Zhang, China
System-of-systems approach for sustainable production planning and controlling in manufacturing companies
  Maximilian Zarte, Agnes Pechmann, Isabel l. Nunes, Germany/Portugal
Set-top box automated lip-reading controller based on convolutional neural network
  Yuanyao Lu, Haiyang Jiang, China
Prototyping in human computer interaction
  Maryam Afzaal, Sidra Perveen, Khadija Akbar, Nazifa Nazir, Mahnoor Dar, Pakistan
 
121
Workplace Safety and Human Factors I
Session 121
Saturday, July 27
13:30-15:30
SMHF
Safety Management and Human Factors 
Columbia 3
  Co-Chairs:  Nanthawan Am Eam and Mohamed Mokdad, Thailand/Bahrain  
  An evaluation of work posture by REBA: A case study in maintenance department
  Nanthawan Am Eam, Thaweeuk Noosom, Kunthara Ninthappho, Patompong Jankaew, Thailand
  Welders’ knowledge of personal protective equipment usage and occupational hazards awareness in the Ghanaian informal auto-mechanic industrial sector
  Mohammed Aminu Sanda, Juliet Nugble, Ghana
  Safety in date palm tree work in Algeria: The role of belt design and use
  Mohamed Mokdad, Bouhafs Mebarki, Lahcene Bouabdellah, Ibrahim Mokdad, Bahrain
 
  The Sailport project: A trilateral approach to the improvement of workers’ safety and health in ports
  Alessandro Filippeschi, Mauro Pellicci, Federico Vanni, Giulia Forte, Giulia Bassani, Lorenzo Landolfi, Diego De Merich,
  Giuseppe Campo, Carlo Alberto Avizzano, Massimo Bergamasco, Italy
  Human-system interaction design requirements to improve machinery and systems safety
  Peter Nickel, Peter Bärenz, Siegfried Radandt, Michael Wichtl, Urs Kaufmann, Luigi Monica, Hans-Jürgen Bischoff,
  Manobhiram Nellutla, Germany
  Hazard analysis of a gas-fired GMH8 Goodman furnace
  Sarah Poelman, Jerry Purswell, USA
 
   
122
Physical Ergonomics and Work-Related Musculoskeletal Disorders I
Session 122
Saturday, July 27
13:30-15:30
PEHF
Physical Ergonomics & Human Factors
Columbia 4
  Co-Chairs:  Henrijs Kalkis and Zenija Roja, Latvia  
  Quantification of the impact of existing vs. enhanced radiation therapy workspace configuration on human performance
  Prithima Reddy Mosaly, Lukasz Mazur, USA
  Influence of the upper limb position on the forearm EMG activity-Preliminary results
  Ilona Kačerová, Marek Bures, Martin Kába, Tomáš Görner, Czech Republic
 
  Physical workload analysis in processing operations: Metal processing manufacturing
  Zenija Roja, Henrijs Kalkis, Kristine Bokse, Inara Roja, Sandis Babris, Ansis Ventins, Latvia
 
  The role of stakeholders in E-occupational health and safety system in Estonia
  Inese Vilcane, Tarmo Koppel, Henrijs Kalkis, Olga Tsenter, Piia Tint, Estonia
 
  The effects of different resting methods on musculoskeletal disorders after prolonged standing tasks
  Ei-Wen Lo, Wan-Hui Chen, Taiwan
  Ergonomic and occupant issues considering elderly female sitting posture on motorcycle in Indian (rural/semi urban) context
  Vaibhav Lothe, Pratik Kumar, India
     
123
Social and Occupational Ergonomics: Evaluation, Optimization and Job Design
Session 123
Saturday, July 27
13:30-15:30
SOE
Social & Occupational Ergonomics
Columbia 9
  Co-Chairs: Hebert Roberto da Silva and Zbigniew Wisniewski, Brazil/Poland  
  The ergonomics of sorting recyclable materials: A case study of a Brazilian cooperative
  Hebert Roberto da Silva, Brazil
 
  Effectiveness of prosthetic adaptation and users’ satisfaction: Comparison between different technologies
  Maria Patrizia Orlando, Claudia Giliberti, Fabio Lo Castro, Raffaele Mariconte, Lucia Longo, Italy
  Handheld grass cutter machine with supporting wheel
  Mayur Mhamunkar, Sagar Bagane, Lokesh Kolhe, Vikrant Singh, Mohit Ahuja, Yueqing Li, USA
 
  Ergonomic evaluation in the Ecuadorian workplace
  Oswaldo Jara, Fanny Ballesteros, Esteban Carrera, Pablo Davila, Ecuador
 
  Path analysis of the antecedents and occupational stress among managers of the textile industries: a cross-sectional study from Pakistan using PLS-SEM
  Aftab Ahmad, Amjad Hussain, Mohammad Pervez Mughal, Nadeem Ahmad Mufti, Muhammad Qaiser Saleem, Pakistan
  Inclusion of the informal sector pension provision under the new pensions act
  Olivia Anku-Tsede, Ghana
 
     
124
Ergonomics in Urban Design II
Session 124
Saturday, July 27
13:30-15:30
SUPI
Human Factors, Architecture, Sustainable Urban Planning and Infrastructure
Columbia 10
  Co-Chairs: Agata Bonenberg and Christianne Falcao, Poland/Brazil  
Users preferences in land use  and architecture of rural areas
  Wojciech Bonenberg, Mo Zhou, Xia Wei, Poland/China
  Accessibility of the open public space in cities
  Alicja Maciejko, Roman Czajka, Poland
 
  Architectural and urban spaces for creative thinking. Visual data and questionnaire analysis methods in support of design process
  Agata Bonenberg, Poland
  Possibilities of using architecture in striving to maintain balance between natural and built environment. Architecture in the invisible borders of greenery
  Anna Wojtas-Haran, Poland
  Functional and aesthetic aspects of modernization of large-panel residential buildings
  Przemyslaw Nowakowski, Poland
 
  The influence factor for walkability of street furniture: In case of Turin
  Xiaolei Shi, Daniela Bosia, Lorenzo Savio, China
 
     
125
Usability and User Experience Applications I
Session 125
Saturday, July 27
13:30-15:30
UUE
Usability and User Experience
Columbia 11
  Co-Chairs:   Jiahuan Qiu and Chenyang Sun, China  
  Obstacles for open design to be adapted by the masses
  Yongtao Zheng, Maiqi Lin, Hai Fang, China
 
  Logic of behaviors and somaesthetics driven user experience research: Design and innovation in air energy products
  Jiahuan Qiu, Jun Zhang, China
  Iterative symbiosis between multi-role user requirements and data information visualization
  Luan Jiachen, Jun Zhang, China
 
  Influence of the user experience in switching speed of the digital reading interface
  Chenyang Sun, Jun Zhang, China
 
  User experience improvement design of shopping mall based on crowd classification research
  Chufan Jin, Jiamin Jiang, Dian Zhu, Xi Chen, China
  Applying the technology acceptance model to consumer behavior towards virtual reality service
  Fei-Hui Huang, Taiwan
  Understanding one-handed thumb interaction with a mobile touchscreen device: Effects of keyboard size, gap and button shape
  Da Tao, Tieyan Wang, Haibo Tan, Jian Cai, Xu Zhang, China
     
126
Usability and User Experience Applications II
Session 126
Saturday, July 27
13:30-15:30
UUE
SUsability and User Experience
Columbia 12
  Co-Chairs:  Aditi Bhatt and Kui Gao, India/China  
  Young Chinese users’ perception of passenger car form in front quarter view analyzed with quantitative and qualitative methods
  Chunrong Liu, Kui Gao, China
  Gamification design of shared bicycle system based on Fogg behavior model
  Xin He, Hui Yan, Xinyue Gong, China
 
  User experience research on the human-computer interaction system of connected car
  Han Gao, Bo Li, Ting Han, China
 
  Spatial heuristic evaluation through way finding: A tale of two Indian cities
  Aditi Bhatt, Saptarshi Kolay, India
 
  An ergonomic assessment of transmission, layout, and content of Philippine fast-food chains' customer feedback surveys for effective data collection
  Dylan Dizon, Maria Sophia Ariola, Von Christiene Dela Vega, Keneth Sedilla, Philippines
  GEST-DC: Unifying transportation and air quality information in an mHealth application
  Vivian Genaro Motti, Niloofar Kalantari, Pattiya Mahapasuthanon, Hui Zheng, USA
 
  User emotional experience evaluation on bicycle design from a multi-sensory perspective
  Jo-Yu Kuo, Danni Chang, China
 
     
127
Management of Productivity in Smart Manufacturing/Industry 4.0
Session 127
Saturday, July 27
13:30-15:30
HFSIM/
SYSI
Human Factors and Simulation / Human Factors and Systems Interaction
Cardozo
  Co-Chairs:  Tim Jeske and Benjamin Adrian, Germany  
  Holistic productivity management using digitalization
  Tim Jeske, Marc-André Weber, Frank Lennings, Sascha Stowasser, Germany
 
  Industry 4.0 technology and employees behavior interaction in Serbian industrial companies
  Zorica Veljkovic, Vesna Spasojevic Brkic, Andrija Petrovic, Serbia
 
  Epistemic debt: A concept and measure of technical ignorance in smart manufacturing
  Tudor Ionescu, Sebastian Schlund, Christina Schmidbauer, Austria
 
  Enabling smart workplaces by implementing an adaptive software framework
  Peter Burggräf, Achim Kampker, Kai Kreisköther, Tobias Adlon, Aaron Riegauf, Benjamin Dorn, Patricia Casla,
  Angelo Marguglio, Giuseppe Donvito,  Germany
  Automatic generation of methods-time measurement analyses for assembly tasks from motion capture data using convolutional neuronal networks - A proof of concept
 Jochen Deuse, Lukas Stankiewicz, Ronny Zwinkau, Frank Weichert, Germany
  Analysing body motions using motion capture data
  Martin Benter, Peter Kuhlang, Germany
 
     
128
Education, Learning and Flipped Classroom
Session 128
Saturday, July 27
13:30-15:30
TELS
Human Factors in Training, Education, and Learning Sciences
Gunston West
  Co-Chairs: Agnese Brunzini and Tibor Barath, Italy/Hungary  
  Music aesthetics course teaching reform based on flipped classroom model
  Hanyang Qu, Dahai Xing, China
 
  Value proposition in higher education – enhancing the learning quality:  Service design based program evaluation and development
  Tibor Barath, Hungary
  Teaching learning aspects for current technical education
  Prasanthi Nunna, India
 
  Measuring student engagement & commitment on private academic institutions using fuzzy logic expert system metrics applications
  Evangelos Markopoulos, Jarno Einolander, Hannu Vanharanta, Jussi Kantola, Ari Sivula, UK/Finland/Poland
  How to improve medical simulation training: A new methodology based on ergonomic evaluation
  Agnese Brunzini, Alessandra Papetti, Eleonora Brandoni Serrani, Martina Scafà, Michele Germani, Italy
     
129
Driving Behavior: Safety and Simulation
Session 129
Saturday, July 27
13:30-15:30
RR
Human Factors in Transportation - Road & Rail
Embassy
  Co-Chairs:   Alessandro Calvi and Songsu Son, Italy/USA  
Applying perceptual treatments for reducing operating speeds on curves: A driving simulator study for investigating driver’s speed behavior
  Alessandro Calvi, Fabrizio D'Amico, Chiara Ferrante, Luca Bianchini Ciampoli, Fabio Tosti, Italy
  Comparing the differences of EEG signals based on collision and non-collision cases
  Xinran Zhang, Yan Xuedong, China
   
  Impact of aggressive driving behavior on intersection efficiency and traffic control
  Songsu Son, UAE
   
  Speed behavior in a suburban school zone: A driving simulation study with familiar and unfamiliar drivers from Puerto Rico and Massachusetts 
  Didier Valdés, Mike Knodler, Benjamin Colucci Rios, Alberto Figueroa, Maria Rojas, Enid Colon, Nick Campbell,
  Francis Tainter, USA
  Learning drivers’ behavior using social networking service
  Acyut Kaneria, Yueqing Li, Xiang Zhao, Vinaya Manchaiah, USA
   
  Driving at night: The effects of various colored windshield tints on visual acuity, glare discomfort, and color perception
  Elijah Gabalda, Jeonne Ramoso, Ma. Gilean Badilla, Keneth Sedilla, Philippines
       
130
Advances in Simulation, Virtual and Augmented Reality
Session 130
Saturday, July 27
13:30-15:30
HFSIM
Human Factors and Simulation
Gunston East
  Co-Chairs:  Teresita Sotomayor, Mark Mazzeo and Debbie Patton, USA  
  User-centric development and evaluation of a lateral canthotomy and cantholysis (LCC) part-task military medical training system
  Margaret Bailey, Teresita Sotomayor, Ian Dykens, USA
  Long term follow-up of self-reported stress and anxiety following in-person and virtual world mindfulness training: A pilot study
  Angela Jeter, Valerie Rice, Jessica Villarreal, Cory Overby, USA
  The medical synthetic training environment (mSTE): Supporting the Army's STE Cross Functional Team (CFT)
  Beth Pettitt, Jack Norfleet, USA
  Optimizing occupational safety through 3D simulation and immersive virtual reality
  Ebo Kwegyir-Afful,  Maria Lindholm, Jussi Kantola, Sulaymon Tajudeen, Sara Tilabi, Finland
 
  Same task, different place: Developing novel simulation environments with equivalent task difficulties
  Benjamin T. Files, Ashley H. Oiknine, Jerald Thomas, Peter Khooshabeh, Anne M. Sinatra, Kimberly A. Pollard, USA
  Controlling simulated entities generated by a virtual environment using a fuzzy logic-based system
  Hung Tran, USA
  3D user interface for a multi-user augmented reality mission planning application
  Simon Su, Vincent Perry, Heather Roy, Katherine Gamble, Sue Kase, USA
 
     
131
Design and Innovation for 3D Printing
Session 131
Saturday, July 27
13:30-15:30
AMMSP
AMMSP
Jay
  Co-Chairs:  Massimo Di Nicolantonio and Martijn ten Bhömer, Italy/China  
  Ma(r)kers: Digital fabrication as opportunity for enhancing territories through hacking, personalization, traces
  Annapaola Vacanti, Xavier Ferrari, Raffaella Fagnoni, Andrea Vian, Italy
  Sustainable 3D Printing: Design opportunities and research perspectives
  Emilio Rossi, Massimo Di Nicolantonio, Paola Barcarolo, Jessica Lagatta, Italy
 
  3D printing to innovate the guitar design
  Antonio Marano, Italy
 
  Artisan as a maker or artisan as not recognized co-designer?
  Gabriele Goretti, Elisabetta Cianfanelli, Benedetta Terenzi, Margherita Tufarelli, Eleonora Trivellin, Italy
  Italian manufacturing: Between technological and social innovation
  Marco Marseglia, Eleonora Trivellin, Elisabetta Cianfanelli, Margherita Tufarelli, Gabriele Goretti, Italy
  CAD/CAM technology application in treatment of complex craniofacial bone defects
  Diana Navarro, Colombia
 
  Application of robust design techniques for 3D printing on textiles
  Martijn ten Bhömer, Derrick Tate, Shixuan Wang, Filippo Campanile, Yaoyu Chen, China
 
     
132
Production Management and Process Control
Session 132
Saturday, July 27
13:30-15:30
APMPC
AAdvanced Production Management and Process Control
Holmead East
  Co-Chairs:  Vanina Silva and Maria Marcela Solis-Quinteros, Brazil/Mexico  
  Analysis of the technological capability of linking SMEs in the electronic sector to integrate into the Maquiladora Industry Electronic sector in Tijuana, Baja California Mexico
  Maria Marcela Solis-Quinteros, Luis Alfredo Avila Lopez, Carolina Zayas-Marquez, Teresa Carrillo-Gutiérrez,
  Karina Arredondo-Soto, Mexico
  Discussion on the iterative process in robust algorithm A
  Zhang Fan, Yue Zhang, Zhao Chao, Jing Zhao, Gang Wu, Haitao Wang, Xinyu Cao, China
 
  Six Sigma-based optimization model in hauling cut and fill exploitation activities to reduce downtime in underground mines in Peru
  Kevin Rojas, Vidal Aramburu, Carlos Raymundo, Javier M. Moguerza, Edgar Ramos, Peru
  Model for monitoring socioenvironmental conflicts in relation to the emission of particulate matter in the prehauling  phase of a surface mine in Peru
  Marcio Filomeno, Josemaria Heracles, Vidal Aramburu, Carlos Raymundo, Javier M. Moguerza, Peru
  The difference between expert and non-expert skill in beauty services based on eye tracking technology
   Kohei Okado, Kazuyuki Tanida, Hiroyuki Hamada, Akihiko Goto, Yuka Takai, Japan
  Three-dimensional motion analysis of Mochi pounding
  Akihiko Goto, Naoki Sugiyama, Daigo Goto, Tomoko Ota, Hiroyuki Hamada, Japan
 
  Design of a model of assignment of workers and operations that reduces the biomechanical danger in a panela productive unit of Colombia
  Yenny Alexandra Paredes, Juan Pablo Caballero, Colombia
     
133
Artificial Intelligence and Machine Learning
Session 133
Saturday, July 27
13:30-15:30
AISC
Human Factors in Artifiical Intelligence and Social Computing
Fairchild West
  Co-Chairs:  Zining Yang and Tim Lauer, USA/Germany  
  Association matrix method and its applications in mining DNA sequences
  Guojun Mao, China
 
  Siri, how to design a procedure? Applying machine learning & natural language processing in procedure design
  Nilesh Ade, Camille Peres, Noor Quddus, USA
  Deep-learning artificial intelligence and system-informational culture ergonomics
  Nicolay Vasilyev, Vladimir Gromyko, Stanislav Anosov, Russia
 
  Deep learning-based real-time failure detection of storage devices
  Chuan-Jun Su, Lien-Chung Tsai, Shi-Feng Huang, Yi Li, Taiwan
 
  Behavioral analysis of human-machine interaction in the context of demand planning decisions
  Tim Lauer, Rebecca Welsch, S. Ramlah Abbas, Henke Michael, Germany
 
  Identifying touristic interest using big data techniques
  Maritzol Tenemaza, Edison Loza, Myriam Peñafiel, Juan Pablo Zaldumbide, Angélica De Antonio, Jaíme Ramírez, Ecuador
     
  Refreshments 15:30-16:00   •   Room: Columbia West  (Terrace Level)
SESSION Saturday, July 27  •  16:00-18:00
TRACK
ROOM
134
Neurobusiness Applications
Session 134
Saturday, July 27
16:00-18:00
CN
Neuroergonomics & Cognitive Engineering
Morgan
  Co-Chairs:  Rajneesh Suri and Hasan Ayaz, USA  
  Using fNIRS and EDA to investigate the effects of messaging related to a dimensional theory of emotion
  Jan Watson, Amanda Sargent, Yigit Topoglu, Hongjun Ye, Wenting Zhong, Rajneesh Suri, Hasan Ayaz, USA
  Brain based assessment of consumer preferences for cognition enhancing hot beverages
  Amanda Sargent, Jan Watson, Yigit Topoglu, Hongjun Ye, Wenting Zhong, Rajneesh Suri, Hasan Ayaz, USA
  The effects of advertising on cognitive performance
  Hongjun Ye, Siddharth Bhatt, Wenting Zhong, Amanda Sargent, Jan Watson, Yigit Topoglu, Rajneesh Suri, Hasan Ayaz, USA
  The effects of incentives in a choice-based conjoint pricing study
  Hongjun Ye, Siddharth Bhatt, Wenting Zhong, Jan Watson, Amanda Sargent, Yigit Topoglu, Rajneesh Suri, Hasan Ayaz, USA
  Electrodermal activity in ambulatory settings: A narrative review of literature
  Yigit Topoglu, Jan Watson, Rajneesh Suri, Hasan Ayaz, USA
 
  Reliability of consumer choices for conflicting price promotions
  Amanda Sargent, Jan Watson, Yigit Topoglu, Hongjun Ye, Wenting Zhong, Hasan Ayaz, Rajneesh Suri, USA
  The neuromodulation of attention:  How to be a more effective speaker
  Merrill Liechty, Robert Phillips, Hasan Ayaz, Siddharth Bhatt, USA
 
     
135
Simulation, Altered Reality and Swarm Supervisory Control
Session 135
Saturday, July 27
16:00-18:00
CN
Neuroergonomics & Cognitive Engineering
Holmead West
  Chair:  Ryan McKendrick, USA  
  Twisted:  Performance implications of presence and task difficulty in virtual command and control planning
  Robert Noneman, Erin Cherry, USA
  Towards a model of mutualistic human-machine teaming
  Ryan McKendrick, USA
 
  Designing a graphical user interface to allow users to accurately interpret fNIRS data with minimal training
  Amanda Harwood, Norman Greenberg, Ryan McKendrick, Carmen Sims, USA
  Identifying groups of people with similar patterns of brain activation using fNIRS time series data and unsupervised machine learning
  Brian Falcone, Bradley Feest, Amanda Harwood, Ryan McKendrick, USA
  S-SMART: Sliding-window spline-based motion artifact reconstruction technique for functional near infrared spectroscopy
  Adrian Curtin, Hasan Ayaz, USA
  Non-visual human-robot communication for superior battlefield situation awareness
  Ryan McKendrick, USA
 
  Human-machine sensory fusion for indoor localization with a hyper-reality helmet
  Yang Cai, USA
 
     
136
User Research
Session 136
Saturday, July 27
16:00-18:00
ED
Ergonomics in Design
Fairchild East
  Co-Chairs:  Pedro Mendonca and Jarosław Tokarczyk, Portugal/Poland  
  Research on human-computer interaction design of bed rehabilitation equipment for the elderly
  Zhijuan Zhu, Wenzhen Pan, Xin Ai, Renjun Zheng, China
  Comparative analysis of body measurement and morphology between subjects with different body mass index
  Caelen Teger Silva, Maria Lucia Okimoto, Brazil
  A new tool for cognitive workload assessment in system design prototypes
  Pedro Mendonca, Manuel Abreu, Portugal
 
  A study on the correlation of head and face data of Chinese adults
  Linghua Ran, Chaoyi Zhao, Hong Luo, Xin Zhang, Taijie Liu, Huimin Hu, Zhongting Wang, China
  Development of an ergonomically designed back pack for junior high school students
  Emmanuel Oliver Porciuncula, Leonard Aquino, Daniel Araneta, Jeremiah Austria, Briant Angelo Censon, John Michael Cruz,
  Patrick Henry Fernandez, Kent Xaivery Moreno, Joshua Ng, Genhino Glenn Reyes, Aroma Santillan, Wendel Jimver De Guia,
  Philippines
  Review of the research on car seating comfort
  Xiaoli Fan, Chaoyi Zhao, Xuemei Chen, Yuwei Jiang, Yongjia Shen, Tong Shen, China
 
  Ergonomics assessment criteria as a way to improve the quality and safety of people’s transport in underground coal mines
 Jarosław Tokarczyk, Dariusz Michalak, Magdalena Rozmus, Kamil Szewerda, Leszek Żyrek, Gregor Železnik, Poland/Slovenia
     
137
Medical Device Development
Session 137
Saturday, July 27
16:00-18:00
EHMD
Human Factors and Ergonomics in Healthcare and Medical Devices
Du Pont
  Co-Chairs:  Helen Fuller and Timothy Arnold, USA  
  Multi-frameworks development for the medical device design process as a critical factor for innovation
  Fabiola Cortes Chavez, Alberto Rossa-Sierra, Elvia Luz González-Muñoz, Carlos Aceves-Gonzalez,
  Paulina Manzano-Hernandez, Maria Giovanna Trotta, Mexico
  Research on sleeping posture recognition method based on pressure sensor
  Huabin Wang, Wan Chang Yuan, China
 
  Finding health care usability and safety issues in consumer product reviews
  Helen Fuller, Timothy Arnold, USA
 
  A guide to drive medical devices development through human factors inclusion: Building a value proposition for local projects.
  Ilse Ivette Reyes Bautista, Gloria Adriana Mendoza Franco, Angel Luis Rodriguez Morales, Mexico
  Preventing chemotherapy-induced onycholysis with the use of an active local cooling device
  Muriel De Boeck, Jochen Vleugels, Marc Peeters, Guido De Druyne, Belgium
 
  A national coalition to address safe integration of complex healthcare technology
  James Piepenbrink, USA
 
     
138
Transportation: Aviation I
Session 138
Saturday, July 27
16:00-18:00
AVI
Human Factors in Transportation: Aviation
Columbia 1
  Co-Chairs:  Amelia Kinsella and Lauren Thomas, USA  
  Considering single piloted airliners for different flight durations: An issue of fatigue management
  Daniela Schmid, Neville Stanton, Germany/UK
 
  Ergonomic assessment of instructors’ capability to conduct personality-oriented training for air traffic control personnel
  Oleksii Reva, Sergii Borsuk, Valeri Shulgin, Serhiy Nedbay, Ukraine
  The human element in performance based navigation: Air traffic controller acceptance of established on required navigation performance procedures
  Lauren Thomas, Alicia Serrato, USA
  How does national culture help pilots in navigating in different environment
  Xiaoyu Wu, USA
 
  Human reliability quantification in flight through a simplified CREAM method
  Yundong Guo, Youchao Sun, China
 
  An eye in the sky: Developing a novel framework for visual air traffic control tower tasks
  Amelia Kinsella, Lori Smith, Rebecca Collins, Katherine Berry, USA
 
  Monitoring performance measures for radar air traffic controllers using eye tracking techniques
Hong Jie Wee, Sun Woh Lye, Jean-Philippe Pinheiro, Singapore
     
139
Workplace Safety and Human Factors II
Session 139
Saturday, July 27
16:00-18:00
SMHF
Safety Management and Human Factors
Columbia 2
  Co-Chairs:  Douglas Minnema and Yang Song, USA/China  
  Development of assistive technologies in additive manufacturing (AM) for people with disabilities
  Eloiza Aparecida Silva de Matos, Ângela Paloma Zelli Wiedemann, Brazil
  A susceptibility model for organizational accidents
  Douglas Minnema, Monique Helfrich, USA
 
  Theory of safety quantification and equivalence oriented industrial system
  Yang Song, Xuefei Yang, China
 
  Determination of safe work practiced in a confine space work: A case study research of an organization in Onne, Nigeria
  Mercy Osato Omoifo-Irefo, Nigeria
  Management of atmospheric hazards in a confined work space in Nigeria:  A case study research of an organization in River State, Nigeria
   Mercy Osato Omoifo Irefo, Nigeria
  Recognition and assessment of ergonomic stressors in VDT workstations
  Namrata Arora Charpe, Vandana Kaushik, India
 
     
140
Safety Culture, Climate, Training and Education
Session 140
Saturday, July 27
16:00-18:00
SMHF
Safety Management and Human Factors
Columbia 3
  Co-Chairs: Jacky Yu Ki Ng and Barry Kirwan, China/France  
  Aggregate-level data characteristics of safety climate with different Likert-type scales
   Siu Shing Man, Jacky Yu Ki Ng, Kar Ying Law, Alan Hoi Shou Chan, China
 
  Next generation safety culture
  Barry Kirwan, France
 
  Role of human safety intervention on the impact of safety climate on workers safety behaviours in construction projects:
A conceptual model
  Emmanuel B. Boateng, Peter Davis, Manikam Pillay, Australia
  Developing a safety culture index for construction projects in developing countries: A proposed fuzzy synthetic evaluation approach
  Emmanuel Boateng, Manikam Pillay, Peter Davis, Australia
  Safety culture as a team sport: The football metaphor
  Frank Guldenmund, Dylan Smibert, The Netherlands
 
  Safety training and occupational accidents – is there a link?
  Susana Costa, Celina Leão, Portugal
 
  Process safety competence of vocational students
  Sari Tappura, Noora Nenonen, Sanna Nenonen, Jouni Kivistö-Rahnasto, Finland
 
     
141
Road and Rail: Usability
Session 141
Saturday, July 27
16:00-18:00
RR
Human Factors in Transportation - Road & Rail
Columbia 4
  Co-Chairs:  Sabrina Moran and Kirsten Revell, USA/UK  
  Development of a prototype steering wheel for simulator-based usability assessment
  James Brown, Neville Stanton, Kirsten Revell, UK
 
  User-centered development of a public transportation vehicle operated in a demand responsive environment
  Alexander Mueller, Stefanie Beyer, Oliver Deisser, Gerhard Kopp, Germany
  Human factors concerns: drivers’ perception on electronic side view system in 21st century cars
  Bankole Fasanya, Yashwanth Avula, Kurra Sivaramakrishna, Bharath Kummari, Supraja Aragattu, Swetha Keshavula, USA
  Should I stay or should I go? - Influencing context factors for users’ decisions to charge or refuel their vehicles
  Ralf Philipsen, Teresa Brell, Hannah Biermann, Waldemar Brost, Teresa Eickels, Martina Ziefle, Germany
  Are you sitting comfortably? How current self-driving car concepts overlook motion sickness, and the impact this has on comfort and productivity
  Joseph Smyth, Paul Jennings, Stewart Birrell, UK
     
142
Social and Occupational Factors of Comfort, Risk Assessment and Pain
Session 142
Saturday, July 27
16:00-18:00
SOE
HSocial & Occupational Ergonomics
Columbia 9
  Co-Chairs: Alessio Silvetti and Z. Shaghayegh Bagheri, Italy/Canada  
  Ergonomic risk assessment of sea fisherman part III: Manual handling and static posture
  Alessio Silvetti, Elio Munafò, Alberto Ranavolo, Antonella Tatarelli, Lorenzo Fiori, Sergio Iavicoli, Pasquale Di Palma,
  Francesco Draicchio, Italy
  Comparisons of three observational ergonomic tools for risk assessment on upper extremities in a pump assembly plant – a pilot study
  Meng-Chuan Ho, Ei-Wen Lo, Taiwan
  Reducing the risk of falls by 78% with a new generation of slip resistant winter footwear
  Z. Shaghayegh Bagheri, Jose Diaz Beltran, Paul Holyoke, Kenneth Hutchinson, Gioconda (Joco) Del Sole, Tilak Dutta,
  Canada
  Ergonomics during the construction of the stations and the drilling of the tunnel in the metro of the city of Quito
  Esteban Carrera, Oswaldo Jara, Pablo Davila, Fanny Ballesteros, Pablo Suasnavas, Ecuador
  Ergonomic issues in manual baked-corn manufacturing in central India
  Dhritiman Bhaumik, Pappu Sharma, Laxmikant Patil, India
 
  Analysis of ergonomic risk factors among cobblers at Jabalpur, India
  Pappu Sharma, Dhritiman Bhaumik, Anugrah Engras Bara, India
 
  The prediction models of the maximum power grip strength and pinch strength in Taiwan manufacturing workers
  Shu-Min Chao, Ei-Wen Lo, Yi-Chen Chiu, Taiwan
 
     
143
Management of Productivity by Using Assistance Systems
Session 143
Saturday, July 27
16:00-18:00
SYSI
Human Factors and Systems Interaction 
Columbia 10
  Co-Chairs:  Tim Jeske and Benjamin Adrian, Germany  
  Method for measuring the application potential of assembly assistance systems
  Sven Bendzioch, Benjamin Adrian, Sven Hinrichsen, Manfred Bornewasser, Germany
 
  Automatic particle classification through deep learning approaches for increasing productivity in the technical cleanliness laboratory
   Ronny Zwinkau, Roman Möhle, Simon Frentrup, Jochen Deuse, Germany
  Digital assembly assistance systems - a case study
  Alexander Nikolenko, Philip Sehr, Sven Hinrichsen, Sven Bendzioch, Germany
 
  How to combine lean, human factors and digital manufacturing - a teaching concept
  Benjamin Adrian, Sven Hinrichsen, Alexander Nikolenko, Frederic Meyer, Germany
 
  Automation configuration evaluation in adaptive assembly systems based on worker satisfaction and costs
  Peter Burggraef, Matthias Dannapfel, Tobias Adlon, Aaron Riegauf, Jessica Schmied, Germany
  Towards a mobile assistance system to raise productivity in maintenance
  Michael Wächter, Thomas Löffler, Angelika C. Bullinger, Germany
 
  Smart devices evaluation and dynamic cognitive assistance system for repair processes in production
  Rainer Müller, Leenhard Hoerauf, Attique Bashir, Christoph Speicher, Matthias Vette-Steinkamp, Ralf Mueller-Polyzou,
  Germany
     
144
Management and Leadership of Company and Organizational Cultures
Session 144
Saturday, July 27
16:00-18:00
HFBMS
Human Factors, Business Management and Society
Columbia 11
  Co-Chairs:  Aleksandra Polak-Sopinska and Zbigniew Wiśniewski, Poland  
  The use of ergonomic methods for ensuring the competitiveness of business structures
  Yulia Salnikova, Larisa Namestnikova, Inna Marahovskaya, Antonina Pakhomova, Russia
 
  Attracting tertiary international students to the EHEA:  Does continent of origin matter?
  Tijmen Weber, Florentin Popescu, The Netherlands
 
  The role of leadership in organizations managed in conformity with ISO 9001 quality management system standard
  Anna Walaszczyk, Aleksandra Polak-Sopinska, Poland
  Computer-aided occupational risk assessment of physical workload in the Logistics 4.0
  Anna Maczewska, Aleksandra Polak-Sopinska, Zbigniew Wisniewski, Poland
 
  Resistance in the change process
  Zbigniew Wisniewski, Aleksandra Polak-Sopinska, Anna Maczewska, Tomasz Berner, Poland
  Selecting the business information security officer with ECU@Risk and the critical roles model
  Esteban Crespo-Martínez, Ecuador
     
145
Human Factors, Business Management and Efficiency 
Session 145
Saturday, July 27
16:00-18:00
HFBMS
Human Factors, Business Management and Society
Columbia 12
  Co-Chairs:  Henrijs Kalkis and Zenija Roja, Latvia  
  Four conceptual perspectives of innovations components
  Jelena Salkovska, Liga Braslina, Daina Šķiltere, Anda Batraga, Aija Legzdina, Girts Braslins, Henrijs Kalkis, Latvia
  Gossip and pro social behavior
  Eyal Eckhaus, Batia Ben-Hador, Israel
 
  Lean manufacturing model based on knowledge management to increase compliance in the production process in Peruvian SMEs in the textile garment sector
  Camila Cortez, Nicole Di-Laura, Gino Viacava, Carlos Raymundo, Francisco Dominguez, Peru
  Inno-Kinetic: Innovative approach for strategic management
  Varit Intrama, Gunthon Uiyamatiti,Pakpachong Vadhanasindhu, Thailand
 
  The effect of macro environmental and firm-level factors on open innovations in product development and their impact on firms’ performance
  Afnan Zafar, Jussi Kantola, Finland
  Customer experience in online-retailing – An analysis of the main segments in German online-retailing
  Silvia Zaharia, Matthias Schmitz, Germany
  Assessing the sustainability of crowdfunding in social media and Google trends
  Maria José Palma Lampreia Dos Santos, Manuel Mota, Maria Fátima Ferreiro, Nawaz Ahmad, Riwzan Raheem Ahmed,
  Carlos Machado-Santos, Emiliana Silva, Portugal
     
146
Service Design and Systems Engineering
Session 146
Saturday, July 27
16:00-18:00
HFSSSE
Human Factors in Software, Service and Systems Engineering
Cardozo
  Co-Chairs:  Tingyi S. Lin and Victor K. Y. Chan, Taiwan/Macau  
  A back-end method realizing the ergonomic advantage of modularized battery systems: ICT equipment, electric vehicles and beyond
  Victor K. Y. Chan, Macau
  Conceptualizing a sharing economy service through information design approach
  Tingyi S. Lin, Taiwan
 
  Service model based on information technology outsourcing for the reduction of unfulfilled orders in an SME of the Peruvian IT sector
  Renato Bobadilla, Alejandra Mendez, Gino Viacava, Carlos Raymundo, Javier M. Moguerza, Peru 
  Community slow transportation service system based on driverless vehicle
  Jintian Shi, Rensi Zheng, China
 
  Online service quality measurement utilizing psychophysiological responses
  Peixian Lu, Li Lisha, Liang Ma, China
 
     
147
Human Factors and Simulated Agents and Social and Multi-Agent Network Simulations
Session 147
Saturday, July 27
16:00-18:00
HFSIM
Human Factors and Simulation
Gunston West
  Co-Chairs:  Julia L. Wright and Shan G. Lakhmani, USA    
  Common ground and autonomy:  Two critical dimensions of a machine teammate
  Corey Fallon, Leslie Blaha, Kristin Cook, Todd Billow, USA
 
  Simulation for human-agent teaming research
  Nancy Cooke, USA
 
  Exploring the effect of communication patterns and transparency on the attitudes towards robots
  Shan Lakhmani, Julia Wright, Michael Schwartz, USA
 
  The influence of signal presentation factors on the performance of an immersive, continuous signal detection task
  Rhyse Bendell, Gabrielle Vasquez, Florian Jentsch, USA
  A human factors approach to networked virtual reality and augmented reality interactions with physiologically-driven believable agents
  Caroline Kingsley, Michael Jenkins, USA
  Steady-state analysis of multi-agent collective behavior
    Hui Wei, Mingxin Shen, Xuebo Chen, China
 
     
148
Communication Design I
Session 148
Saturday, July 27
16:00-18:00
HFCD
Human Factors in Communication of Design
Embassy
  Co-Chairs:  Laura Giraldi and Edward Chor Kin Hung, Italy/Hong Kong  
  The historical context of Guangzhou time-honored catering brands' narration
  Xiaobao Yu, Qian Peng, China
 
  Kids at pre-school.  Designing products and wayfinding systems to enhance kids’ skills, facilitating well-being through communication
   Laura Giraldi, Elisabetta Benelli, Marta Maini, Francesca Morelli, Italy
  A comparative study on the language expressions of cultural and creative products in the east and west
  Chen Cheng, Junnan Ye, Hui Gao, Guixiang Wu, China
  3D scanning and visual dimension - Technological and creative evolution
  Lai Man Tin, Hong Kong
 
  Improvement of safety sign design based on analysis comprehensibility test result
  Chuanyu Zou, Yongquan Chen, China
 
  Research on design communication mode based on white BI theory
  Xinying Wu, Minggang Yang, Xinxin Zhang, China
 
     
149
Kansei Engineering I
Session 149
Saturday, July 27
16:00-18:00
KE
Kansei Engineering
Gunston East
  Co-Chairs:   Tetsuo Inoue and Jiayin Lu, Japan/China  
  Evaluation of feel of fishing reel by elucidating relationship between tactile sensation and gear vibration
  Tetsuo Inoue, Syuhei Kurokawa, Japan
  Investigation of happiness index by Kansei engineering and positive psychology
  Toshio Tsuchiya, Japan
 
  A case study on Turkish tea glasses and Kansei engineering
  Müge Göken, Ekrem Cem Alppay, Turkey
 
  A study on the perception of wireless headphone form design based on Kansei engineering
  Huan Lin, Shijian Luo, Fangtian Ying, Ping Shan, Wenyin Zou, Huimin Yi, Chen Zhu, Hongzhuan Ding, Xiaolei Deng, Li Lin,
  China
  Research on city brand identity design based on perception
  Jiaying Lu, Jiong Fu, China
 
  Intelligent recommendation system for eyeglass design
  Ziyin Zhao, Lei Zhou, China
 
  Virtual performance and evaluation system of garment design based on Kansei engineering
  Yufei Zhang, Shijian Luo, Zhitong Cui, Ze Bian, Ping Shan, China
 
     
150
Manufacturing Aspects of Work Improvement
Session 150
Saturday, July 27
16:00-18:00
APMPC
Advanced Production Management and Process Control
Jay
  Co-Chairs:  Krzysztof Hankiewicz and Adam Górny, Poland  
  Use of quality management tools to identify ergonomic non-conformity in human activity
  Adam Gorny, Poland
 
  The method of ergonomic design of technological devices
  Malgorzata Slawinska, Poland
 
  Cognitive and emotional-motivational aspects of communication to improve work safety in production processes: case study
  Joanna Sadłowska-Wrzesińska, Poland
  Benefits in the field of ergonomics and work safety from the development of the information system in the enterprise
  Krzysztof Hankiewicz, Andrzej Lasota, Poland
  Eye movement analysis of craftsman for Japanese knife sharpening
  Naoki Sugiyama, Hiroshi Ashi, Eiji Horiba, Shinichiro Nishiura, Miyako Takao, Kazuaki Yamashiro, Norimichi Nanami,
  Akihiko Goto, Hiroyuki Hamada, Yasumasa Komaki, Japan
  Management of anthropopression factors in Poland in the context of the European union waste economy
  Józef Frąś, Ilona Olsztynska, Sebastian Scholz, Poland
     
151
Human Factors and Assistive Technology III
Session 151
Saturday, July 27
16:00-18:00
HFAT
HHuman Factors and Assistive Technology
Holmead East
  Co-Chairs:  Hyung Nam Kim and Stijn Verwulgen, USA/Belgium  
  Voice technology for self-care in older adults with visual impairments
  Hyung Nam Kim, USA
 
  Abstract vocabulary as base for training with pattern recognition EMG control
  Erik Haring, Seth Van Akeleyen, Kristof Vaes, Steven Truijen, Stijn Verwulgen, Belgium
 
  An eye tracking system to perform the Wechsler Intelligence Scale for children (WISC-V) test
  Karla Andrade, Omar Alvarado, Patricia Margarita Ortega Chasi, Martha Cobos, Ecuador
 
  Study of voice-based crowdsourcing platform for the enhancement of self-support for the visually impaired
  Ga Ram Song, Jini Kim, HaYeong Kim, Eunseo Kim, South Korea
  Design of health control applied to elderly people's resistance exercise device
  Tang-Yung Hsu, Fong-gong Wu, Hsi-Jen Chen, Taiwan
 
     
     
     
     

 Friday, July 26
Detailed Technical Program
  Saturday, July 27
Detailed Technical Program
  Sunday, July 28
Detailed Technical Program
 

  2019 Tracks and Acronyms  
1 Human Factors in Aging and Gerontology  AGE
2 Human Factors in Artifiical Intelligence and Social Computing AISC
3 Additive Manufacturing, Modeling Systems and 3D Prototyping  AMMSP
4 Affective and Pleasurable Design APD 
5 Advanced Production Management and Process Control APMPC
6 Human Factors in Transportation:  Aviation AVI
7 Cross-Cultural Decision Making CCDM
8 Cognitive Computing and Internet of Things (IoT) CCIoT
9 Neuroergonomics & Cognitive Engineering CN
10 Human Factors in Cybersecurity CYBER
11 Digital Human Modeling and Applied Optimization DHMAO
12 Design for Inclusion DI
13 Ergonomics in Design ED
14 Human Factors and Ergonomics in Healthcare and Medical Devices EHMD
15 Human Factors in Energy: Oil, Gas, Nuclear and Electric Power Industries ENERGY
16 Human Error, Reliability, Resilience, and Performance  HERRP
17 Human Factors and Assistive Technology HFAT
18 Human Factors for Apparel and Textile Engineering HFATE
19 Human Factors, Business Management and Society  HFBMS
20 Human Factors in Communication of Design HFCD
21 Human Factors in Virtual Environments and Game Design  HFGD
22 Human Factors in Management and Leadership HFML
23 Human Factors in Robots and Unmanned Systems HFRUS
24 Human Factors and Simulation HFSIM
25 Human Factors in Software, Service and Systems Engineering HFSSSE
26 Human Factors and Wearable Technologies HFWT
27 Industrial Cognitive Ergonomics and Engineering Psychology ICEEP
28 Interdisciplinary Practice in Industrial Design IPID
29 Kansei Engineering  KE
30 Human Factors in Transportation:  Maritime MAR
31 The Human Aspects of Advanced Manufacturing: Managing Enterprise of the Future MFG 
32 Physical Ergonomics & Human Factors PEHF
33 Human Factors in Transportation: Road & Rail RR
34 Human Factors in Sports, Injury Prevention and Outdoor Recreation  SIPOR
35 Safety Management and Human Factors SMHF
36 Social & Occupational Ergonomics SOE
37 Human Factors in Transportation:  Space  SPACE
38 Human Factors, Architecture, Sustainable Urban Planning and Infrastructure SUPI
39 Human Factors and Systems Interaction SYSI
40 Human Factors in Training, Education, and Learning Sciences TELS
41 Usability and User Experience UUE
00
 
Back to Top